JS Satin Varnish.jpeg

JO SONJA'S SATIN VARNISH (WATER BASED) - 250ML

RM 70.60


JO SONJA'S SATIN VARNISH (WATER BASED)

Directions:
• A coat of Clear Glaze Medium is recommended as a barrier coat prior to varnishing depending on climate and humidity.


• Use Varnish full strength. If thinning is necessary, add drops of Flow Medium or Retarder. Do not over dilute.


• Apply thin layers in a criss-cross motion using a soft but firm bristle brush suitable to surface size.


• Smooth coat with by brushing final in the direction of the wood grain.


• Allow to air dry a minimum of an hour before applying additional coats.  Drying time varies depending on climate and humidity.


• Apply three coats before sanding. Sand lightly if 24 hours have lapsed between coats to ensure proper adhesion.


• For alcohol resistant finish or for outdoor use, apply a minimum of 4 to 5 coats of varnish. Allow to cure a minimum of 2 weeks before use.


• If using a hair dryer for surface drying, hold away from the surface and avoid excessive heat which could cause cracking.

 


Clean up with mild soap and water.

 



Note: Not recommended for use over oil based paint or oil based antiquing finishes.